White lithium grease

Buyers should prioritize the NLGI Grade (typically Grade 2 for general purpose) to ensure proper consistency. Key performance metrics include the Dropping Point (should be above 190°C/374°F for high-heat stability) and Four-Ball Wear Test results to verify extreme pressure (EP) performance. Additionally, ensure the formula includes corrosion inhibitors and zinc oxide for superior metal-to-metal lubrication and moisture resistance.

It is critical to verify that the supplier provides a valid SDS (Safety Data Sheet) compliant with GHS (Globally Harmonized System) standards. For food-grade applications, look for NSF H1 or H2 registration. If exporting to Europe, ensure REACH compliance, and for the US market, check for TSCA (Toxic Substances Control Act) inventory status to avoid customs seizures.

Request a Certificate of Analysis (COA) for the specific batch and ask for Oil Separation (Bleed) test results (ASTM D1742) to ensure the lubricant won't break down during storage. For aerosol formats, verify the internal pressure and spray pattern consistency. I recommend sourcing samples via Made-in-China.com to conduct a 'washout test' to see how the grease performs under high-humidity conditions.

For high-volume industrial maintenance, 35lb pails or 400lb drums offer the lowest price per kilogram. However, for retail or specialized technician use, 10oz to 16oz aerosol cans or 3.5oz tubes are preferred. When sourcing from overseas, consider the shelf life (typically 2-5 years) to balance inventory holding costs against bulk shipping discounts.

White Lithium Grease, especially in aerosol form, is classified as Class 2.1 Flammable Gas or Class 9 Miscellaneous Dangerous Goods depending on the propellant. You must ensure the supplier provides a UN38.3 test report or a Dangerous Goods Declaration. Use a freight forwarder experienced in DG (Dangerous Goods) shipping to navigate strict maritime and air freight regulations.

Utilize Secured Trading Services on Made-in-China.com to protect your payment until the goods are shipped. Always conduct a Pre-Shipment Inspection (PSI) through a third-party agency like SGS or Intertek to verify that the chemical composition matches the approved sample, preventing 'quality fade' in large batches.

Focus on raw material price indexing; since lithium and base oils are commodities, link long-term contracts to market price fluctuations. Negotiate for custom labeling (OEM) at lower MOQs to increase your brand value, and request tiered pricing where the unit cost drops significantly once you exceed a full container load (FCL).

Check the HS Code (typically 2710.19 or 3403.19) against your country's tariff schedule. Be mindful of Anti-Dumping Duties that some regions apply to chemical products from specific origins. Ensure all Export Licenses for hazardous chemicals are cleared by the Chinese customs authorities before the vessel departs to avoid lengthy port delays.